110 Degree 9mm 1/2 Overlay, 35mm Cup Diameter, Clip-On Hinge For Frameless Installation
Use typically for two doors meeting in middle of a separator panel (cabinet wall)
- For cabinets without face frames
- For 3/4" doors and 3/4" thick side panels
- Adjustment for vertical, horizontal and depth when mounted
- Order #6 wood screws separately for mounting -No screws included
- Finish: Bright Nickel
Half overlay hinges overlay less than half of the panel they are attached to so that a gap of about 3mm is left between doors meeting "back-to-back".
An overlay of 8mm by each door will result in this 3mm gap if the cup bore distance from the edge of the door is 4mm.
ORDER MOUNTING PLATES SEPARATELY: USE HR-400-0R22-05 0MM PLATE