Our Octagon Cut Glass Knobs are handmade in the same way that the original antique glass cabinet knobs were made. These hand cut and polished pressed glass knobs are beautiful and Gloriously Not machine-made perfect. A bubble or two here or a slight imperfection there is a testament to originality and not a flaw. Cut glass cabinet knobs are cut and polished by hand, so each knob may have slight variations that are not particularly noticeable.
A pressed glass cabinet knob is made from molten glass that is “pressed” into a cast iron mold of the desired shape. Similar to making taffy, only at a temperature of 1500 degrees, the ingredients for making glass, mostly sand, lime and soda (not the Mountain Dew kind) are mixed into a furnace until the mixture is molten and the consistency of taffy. Different metal and mineral powders are added to make a desired glass knob color if it is to be something other than clear. Then, the glass is gathered onto an iron rod, held over the top of the glass-knob-shaped mold and an appropriate sized ‘glob” is snipped off with scissors and dropped into the open mold. The maker then pushes a plunger into the mold to press the glass into the shape of a glass knob. The glass cabinet knob is removed and slowly cooled. This technique was first patented by American inventor John P. Bakewell in 1825 to make knobs for furniture. Yes the very first pressed glass was glass furniture knobs!
Further work is required to make these octagon cut glass knobs. Cut glass knobs require that maker take the “blank” glass knob and grind the final pattern into the glass knob surface and then polish the resulting knob into a gleaming addition to your cabinets or furniture piece. Oh, and then the finished glass is attached to its metal setting. Enjoy these beauties from the past!