Die Cast Hook - Hook Antique Brass Plating with two white ceramic knob.
This hook would be appropriate for a wide range of Coat Rack styles and wall hangings.
- Centers: 1" (25.4 mm)
- Total Dimensions: 5 1/2" x 3 3/4" (140 mm x 96 mm)
- Base Dimensions: 1 5/8" x 1 1/16" (41 mm x 27 mm)
- Hook Width: 3/8" (10 mm)
- Mounted: Back
- Finish: Antique Brass
This hook mounts from the back with threaded screw holes on the backside of the hook.
If mounted on a board the screws would go through the backside of the board. You can not directly mount to a wall.
If used on a door the screw heads would show on the other side of the door.
Could be used on a closet door where the screw heads showing would not make a difference.
Uses an 8-32 screw - use material thickness for length as threaded section of 1/4" extends from back of base. If your wood is 3/4" you will need 3/4" screw. Comes with 1" screws. Purchase other lengths of screws separately.