Easy-On Invisible Spring Hinge - Inset or Overlay H34-H535NP

Item #:
Write a Review
Current Stock:
Share this:

Product Overview

The Amazing Problem Solver Invisible Hinge No concealed hinge cup boring to do. Surface mounts and does inset, full overlay, or half-overlay. This hinge requires experienced knowledge of the workings of euro hinges to install. Invisible Spring Hinge for Inset, Full or Partial overlay doors. Euro-Hinge performance from a surface mount hinge. Up to 25/32" overlay. 90 degrees opening. Use for doors up to 3/4" thick. Material .02 thickness. This hinge is for use on cabinets without face-frames. If you have face-frames you must use a 1 3/4" block attached at 90 degrees to face-frame to mount this hinge.

  • Overall Dimensions: 3 5/8" x 1 3/4" x 1" (92.075 mm x 44.45 mm x 25.4 mm)
  • Base Dimensions: 1 1/4" x 1 3/4" x 3/4" (32 mm x 44.45 mm and 1 1/8" x 1 3/4")
  • Base Centers: 1 5/16"
  • Finish: Unichrome (Nickel Plated)


Requires 4-8 #6 round head screws. D. Lawless Hardware See technical info tab for installation instructions and mounting template.

H34-H535NP For Complete Mounting Instructions and Templates For Drilling Click Hinge Installation Instructions and Hinge Mounting Template for the .PDF files.
These are generic instructions.
Please match your hinge against the drill pattern on the template before drilling any holes.

Shipping & returns